Cigweld BlueVenom XF190 Multi Process Package

SKU: CIGW1400190 Cigweld BlueVenom XF190 Multi Process Package Synergic 3-in-1 welding inverter with MIG plate thickness selection! The BlueVENOM XF190 is the perfect solution for light fabrication, maintenance and repairs or for DIY around the home, workshop, worksite, or farm without compromising on quality, safety and performance! With the avid welder in mind, CIGWELD has introduced “Opti-Start”, a feature that allows the user to customise their starting arc characteristics through Soft and Hard Start controls. Additionally, this machine has the following features built-in: • 2 x Roll All-Driven (top & bottom) Wire Drive system • MIG Adjustable Wire Burnback & Inductance • MIG Adjustable Soft & Hard Start (Opti-Start) • MIG Wire Inch button • MIG Gas Purge Button • MIG Side door wire installation, side loader • MIG Anti de-spooling safety feature • MIG Spool Gun Compatible • STICK with Voltage Reduction Device (VRD) built-in for Safe Welding • STICK Adjustable Hot Start • STICK Adjustable Arc Force • STICK Anti-Stick • Thermal Overload Protection • TIG Foot Control Compatible • TIG Dial Remote Torch Compatible PACKAGE CONTENTS BlueVENOM XF190 Power Source CMGBZ15E3 MIG Gun 3m- Euro quick connector Work Clamp with 3m Lead Twist Lock Electrode Holder with 3m Lead 2 x Feed Rolls: 8/0.9mm Gasless, 0.8/0.9mm Solid Wires (Fitted). 2m Argon Gas Hose and Gas Regulator Includes Nylon Inlet Guide for use on Soft Alloy Wires Operating Manual SMALLER, LIGHTER, YET MORE POWER The all NEW BlueVENOM XF190 is loaded with Xtra Functions that pack a serious sting to help you get your job done 30% smaller than some other machines in its class and lighter in weight at only 9.5kg’s, the XF190 is an 3-in-1 multi-process welding machine with QuickSet Plate Thickness selection taking the guesswork out of welding! Plate Thickness setting allows you to set up in a flash! There is no guessing the welding Use the QuickSet feature to set the machine to the correct plate thickness you are welding. TIP: You can check the plate thickness with a measuring device, such as a ruler or vernier caliper. If two different plate thicknesses are to be joined, then add the two together and divide by 2 and use the average plate thickness as your setting Navigate with ease through the bright blue 4.3” Sharp LED panel for superior clarity and ‘Plug n’ Weld’ using a 230V/240V 10 Amp plug to get you striking that arc in no time! The XF190 can deliver awesome arc characteristics in the most popular processes of, MIG (QuickSet and Manual, Gas & Gasless), STICK (MMAW for Electrodes with VRD for extra safety) and TIG (DC Lift TIG) welding WARRANTY PERIOD 2-Year conditional warranty. See terms and conditions at cigweld.com.au or in the Operating Manual, included with the machine. Register online for a 6 months extended warranty! Power Supply (Voltage) Single-Phase 230V/240V +/- 15% Australian Standard AS 60974.1:2020 Nominal Supply Frequency 50/60Hz Supply Lead and Plug supplied 10 Amp Minimum Single Phase Generator Recommendation 10kVA (at 0.8 Power Factor) at Max Amps Amperage Range (MIG) 30 – 190A Voltage Range (MIG) 15.1 - 26.0V MIG (GMAW) Duty Cycle @ 40°C, 10 minutes 185 Amps @ 9% 72 Amps @ 60% 56 Amps @ 100% STICK (MMAW) Duty Cycle @ 40°C, 10 minutes: 160 Amps @ 10% 65 Amps @ 60% 50 Amps @ 100% TIG (GTAW) Duty Cycle @ 40°C, 10 minutes 190 Amps @ 10% 77 Amps @ 60% 60 Amps @ 100% Nominal DC Open Circuit Voltage in MIG Mode 52V Open Circuit Voltage (VRD On) STICK Mode <35V Weight of Power Source 9.5kg Power Source Dimensions (mm) L: 465 x W: 190 x H: 340 Weight of Full Package 16.6kg Full Package Dimensions (mm) L: 530 x W: 295 x H: 345 Protection Class IP 21S